Skip to Content

WoodMaxx MX-8500G+



Orders placed today will ship within 7-10 business days.

Shipping Policy Check Compatibility

This will also add the following products to your cart:

  • Premium PTO Shaft

Product Code: MX-8500G+ -0001

Product Details

WoodMaxx MX-8500G+ Direct Drive & Gravity Feed

Made in the USA PTO Wood Chipper

Customer video here->


MX-8500G+ SPECS:

  • Proudly Made in the USA!
  • Patent Pending “Rotary Anvil” a first of its kind
  • Heavy Duty 110 lb. Structural Steel Flywheel
  • 15 Minimum PTO Horsepower
  • Four (4) Made-in-the-USA Reversible Chipper Knives (offset)
  • Easy Knife Access
  • Clear Vinyl Chip Baffle
  • Direct Drive PTO
  • Sloped Infeed Bin
  • True 8″ x 5″ Infeed opening
  • 3 Year Warranty
  • Assembled Weight: 420lbs.
  • Shipping Dims: 40x48x42
  • Shipping Weight: 530lbs.


Not Sure?
Not Sure?

Product Resources

10 reviews for WoodMaxx MX-8500G+

  1. Jon Kelley

    I bought the 8500 to run behind my JD3005 which is 24 hp at the pto. I was concerned it would be underpowered, boy was I wrong it easily chipped anything I was able to shove in there. The gravity feed work’s impressively well. There were a few 3/4”. – 1” Y’s that wouldn’t get dragged in, but most everything else did.
    The assembly was easy and the instructions were clear. The hopper was heavy, but I did install it myself. The pto shaft shortening instructions were also easy to follow.
    Great product, I’m glad I bought it.

  2. Jim M

    The 8500G is an absolute beast…built like Hercules, meaner than Sparticus and easier to operate than a wind-up, battery operated Doctor doll.
    For years I used a tow behind DR wood chipper which was adequate for most things, but my place seems to grow trees and brush like they had litters of fifty so I needed something more robust…this is the guy. The 8500 is more than enough to handle anything I can throw at it and generally it’s a lot…I have a lot of trees and aging, ice storms, nasty straight line winds and all the other debris gives me fits if I don’t clean them up immediately.
    The metal on this equipment is commercial grade heavy…assembly was a snap, easily accomplished by one person, except lifting and placing the feed chute is easier with two…one lifting and the other guiding.
    As a veteran myself, I look to always buy American, and a veteran owned business is simply a bonus.
    The only thing I would like to have seen was an output chute that was capable of rotating to change direction as this one is fixed, but that’s not even at the level of “minor” concern.
    The gravity feed works like it’s power fed, meaning less things to go wrong or maintain.
    The highest rating I can give anything I buy online is, “I’d buy it again”.
    If you need a wood chipper and want a gravity fed chipper, you might want to consider this one…fair price, robust and sure to give years of service.

  3. Doug_Milewski

    Since purchasing the MX-8500G+ I have experienced many stalls on the rotary anvil due to build-up of debris between the end of the roller and the mounting tab. I have to pull the roller to clean it out. I constantly have to check to make sure it still rotates freely. I also have to clear small twigs that build up around the flywheel and at the mouth of the flywheel. I’ve made a hook to drag the jammed twigs out from around the flywheel housing. These are constant maintenance issues with this chipper design. On a good note, the chipper is a beast and can handle most anything I put into it. I have it hooked to my JD 1025r tractor and run the pto at 540 rpm.

  4. rick overley

    The 8500g+ exceeds my expectations, this is a quality made chipper I would highly recommend woodmaxx. Their chipper is awsome great working piece of machinery. proud to serve veteran owned company. Good job woodmaxx crew

  5. rick overley

    I bought the 8500G+ for kubota L3200 everything went together perfectly, I have used other chippers all self feed, however this chipper does not need a self feed the way feed shoot is angled it just sucks in the branches in as if it were self feed. This chipper will handle a 5″ piece as stated, it has far exceed my expectations. I would recomend this company’s chipper to anyone looking to buy a chipper.All american made products good quality metal all the way down to the nuts and bolts supplied to put it together after arrival. Nice chipper WoodMaxx. You guys have a great product,and i am proud to support a veteran owned company.

  6. Doc Abbick

    The feed system on the MX-8500G works great: elegant in it’s simplicity. A powered feed would only be one more thing to pay for, to maintain, and to repair. Since I have the I-Match system on my John Deere 3720, the PTO shaft fit perfectly without alteration.

  7. Arthur Pratt

    Great chipper. I pre-ordered this before it came out and had to wait a bit to use it but it was worth the wait. This is awesome and i have to say that even though it is gravity fed, it is like a self feeding chipper. I did not have the money for the self feed chippers but this one is just as good. I am very well satisfied with this and will come in good use on the farm for many years to come. The only disappointment was the shipping. From the time it left New York to finally get it here in Colorado it took over 3 weeks. It was a little frustrating working with the shippers when they set up a time to deliver it and never did and finally after setting up a time to deliver it the 4th time it was delivered.
    If you are looking for a great chipper you will be happy with this one.)

  8. william G walker

    Bought this mx 8500g+ for my kubota bx 2380….it works awesome! Way exceeded my expectations..great value for price!

  9. Ralph Smoker

    The woodmaxx 8500 G+ has exceeded my expectations. This chipper is an absolute beast. since we received our chipper we have saved countless hours from cutting, hauling, unloading, and burning our limbs. The 8500 G has been a huge time and labor saver. I would definitely recommend buying the 8500 G if you’re in the market for a chipper. I am also extremely pleased to support a veteran owned and run company. God bless the men and women who serve and God bless America.

  10. Ben Sutton

    I bought this chipper and it was delivered to my door in less than a week. Put it to use and made money with it the very next day. Works better than I expected and I highly recommend!

Add a review

Your email address will not be published. Required fields are marked *

In Stock Notification Please fill out the requested information below with your email and cell phone number (NO dashes). We will email and text you when this product is back in stock. This serves as an "In Stock" alert only and not a guarantee of a purchase. You will remain on the notification list for 60 days - after 60 days you will need to add your name back on the list.