lbs. Tractor Rotary Tillers need to be heavy in order for the tines to
penetrate the ground, and reduce bucking.
to the right of center. Th
tiller is offset from the center of the PTO so that you don't end up with
compacted tire tracks in you finished bed.
same rotation as the tires of the tractor when traveling forward. This rotation
requires less HP to operate; allows for a smoother bed of soil behind the
tiller, and allows rocks to expel without recycling them through the tiller.
side runners to 8" deep. Adjustable and replaceable side runners allow for deep
NUMBER OF FLANGES
this is the total number of disc on the rotor that support the tines. These
disc are precisely spaced to maximize tilling coverage while at the same time
reduce jamming caused by rocks and debris.
TINES PER FLANGE
6 inner flanges use 6 tines. Th
e 2 out flanges use 3 inward facing tines. This configuration reduces the impacting of
dirt between the outside flanges and the side plate ultimately wearing on the
bearing seals, at the same time redirecting the soil to the inside of the
tiller instead of spilling it out the sides of the tiller. WoodMaxx
TOTAL # OF TINES
tines are precisely spaced to maximize down pressure on each tine as the rotor
turns. They are also spaced to allow rocks and large debris to be easily
Blade types of this PTO Tiller are Self-sharpening C-shaped. C
ompared to L- shaped, the C- shape is more
efficient, and requires less HP to dig into the soil. The gradual c-shape is
stronger than the sharp bend of the L-shaped blades.
BLADE (TINES) MATERIAL
60SI2MN, spring steel, (American standard: A29M) formed, heat treated, and
quenched in oil. These blades are self-sharpening and made to last.
diameter 5/16" wall tube. Large tube diameter adds strength and rigidity.
ROTOR SWING DIAMETER
19-1/2" diameter. Large swing diameter allows for deep digging.
ROTOR SHAFT SPEED
RPM PTO input speed = 210 RPM rotor shaft speed. The rotor speed is matched
with the number of tines to reach the ideal torque required to tear through the
and formed 5/32", .16", 8 - gauge. Heavy formed Q-235 (American standard ASTM
a-36) structural steel plate. Forming allows for additional strength and
SIDE PLATE MATERIAL
.32". Heavy Q-235(American standard ASTM A-36) structural steel plate; think
steel to ensure structural integrity of the unit during heavy use.
dirt in and maintains a level finish. The deflector is shaped and formed for
additional strength. Adjustable deflector level allows for various finish
1- 3/8" - 6 spline shaft, proven cast iron, oil bath gearbox; ratio is
bath gear driven side gear drive mechanism; gear ratio is 1.52:1 gear drive is
superior to chain drive in every way.
3-point hitch. Or
category 1 quick hitch 14a, clevis type lower
hitch make attaching to your tractor a breeze.
driveline with slip clutch torque limiter. Co
mpetitors don't use the heavy T5 type that we
do. The slip clutch is a must when tilling. The slip clutch will slip a little
during heavy tilling or when contacting an unmovable object.
the tiller during storage to prevent it from tipping.
Baked-on powder coat, powder coat is superior to paint.
year parts warranty.
our service department is staffed with
professional certified technicians that inspect each machine before it is
shipped. This ensures that you get a trouble free machine from the get go. When
you need technical help or parts, our courteous staff can help you get what you
need from our fully stocked warehouse. We keep a full line of replacement
parts, and guarantee that we can ship any part within 24 hours.
Color swatches are available. Please request if color matching is a concern.
California Residents See Prop 65 WARNINGS