Features
QUICK SPECIFICATIONS - 30 h9 min. required - 3-pt. hitch mount - fits category 1 or category 2 (also cat-1 quick hitch) - Weight 781 lbs. - 73" working width and 80" overall width - Offset 10" to the right of center - Forward rotation - 8" deep adjustable side runners - 8 flanges for precision and efficiency - 42 tines to maximize down pressure - Self-sharpening C-shaped blades made of .25" 60SI2MN spring steel - Rotor Diameter-3" diameter 5/16" wall tube - Rotor Swing Diameter- 19-1/2" - Rotor Shaft Speed- 540 RPM - Deck Material- Shaped & formed 5/32",.16", 8-gauge structural steel plate - Side Plate Material- 5/16", .32", heavy Q-235 structural steel plate - Rear Deflector - Gear Ratio is 1:52:1 - Slip Clutch Protected. PTO Shaft Included. - Parking stand - Baked on powder coat finish - 2 yr. parts warranty
WEIGHT
781
lbs. Tractor Rotary Tillers need to be heavy in order for the tines to
penetrate the ground, and reduce bucking.
WORKING WIDTH
73"
OVERALL WIDTH
80"
OFFSET
10"
to the right of center. The
tiller is offset from the center of the PTO so that you don't end up with
compacted tire tracks in you finished bed.
ROTATION
Forward,
same rotation as the tires of the tractor when traveling forward. This rotation
requires less HP to operate; allows for a smoother bed of soil behind the
tiller, and allows rocks to expel without recycling them through the tiller.
HP REQUIRED
30-55
HP
WORKING DEPTH
Adjustable
side runners to 8" deep. Adjustable and replaceable side runners allow for deep
tilling.
NUMBER OF FLANGES
8
this is the total number of disc on the rotor that support the tines. These
disc are precisely spaced to maximize tilling coverage while at the same time
reduce jamming caused by rocks and debris.
TINES PER FLANGE
The
6 inner flanges use 6 tines. Th
e 2 out flanges use 3 inward facing tines. This configuration reduces the impacting of
dirt between the outside flanges and the side plate ultimately wearing on the
bearing seals, at the same time redirecting the soil to the inside of the
tiller instead of spilling it out the sides of the tiller. WoodMaxx
exclusive design.
TOTAL # OF TINES
42
tines are precisely spaced to maximize down pressure on each tine as the rotor
turns. They are also spaced to allow rocks and large debris to be easily
expelled.
BLADE TYPE
The
Blade types of this PTO Tiller are Self-sharpening C-shaped. C compared to L- shaped, the C- shape is more
efficient, and requires less HP to dig into the soil. The gradual c-shape is
stronger than the sharp bend of the L-shaped blades.
BLADE (TINES) MATERIAL
.25"
60SI2MN, spring steel, (American standard: A29M) formed, heat treated, and
quenched in oil. These blades are self-sharpening and made to last.
ROTOR DIAMETER
3"
diameter 5/16" wall tube. Large tube diameter adds strength and rigidity.
ROTOR SWING DIAMETER
19-1/2" diameter. Large swing diameter allows for deep digging.
ROTOR SHAFT SPEED
540
RPM PTO input speed = 210 RPM rotor shaft speed. The rotor speed is matched
with the number of tines to reach the ideal torque required to tear through the
earth.
DECK MATERIAL
Shaped
and formed 5/32", .16", 8 - gauge. Heavy formed Q-235 (American standard ASTM
a-36) structural steel plate. Forming allows for additional strength and
rigidity.
SIDE PLATE MATERIAL
5/16",
.32". Heavy Q-235(American standard ASTM A-36) structural steel plate; think
steel to ensure structural integrity of the unit during heavy use.
REAR DEFLECTOR
Keeps
dirt in and maintains a level finish. The deflector is shaped and formed for
additional strength. Adjustable deflector level allows for various finish
results.
MAIN GEARBOX
ASAE
1- 3/8" - 6 spline shaft, proven cast iron, oil bath gearbox; ratio is
1.69:1.
GEAR DRIVE
Oil
bath gear driven side gear drive mechanism; gear ratio is 1.52:1 gear drive is
superior to chain drive in every way.
HITCH TYPE
Standard
3-point hitch. Or
category 1 quick hitch 14a, clevis type lower
hitch make attaching to your tractor a breeze.
PTO SHAFT
T5
driveline with slip clutch torque limiter. Competitors don't use the heavy T5 type that we
do. The slip clutch is a must when tilling. The slip clutch will slip a little
during heavy tilling or when contacting an unmovable object.
PARKING STAND
Supports
the tiller during storage to prevent it from tipping.
FINISH
Baked-on powder coat, powder coat is superior to paint.
WARRANTY
2
year parts warranty.
PART/SERVICE
At
WoodMaxx
our service department is staffed with
professional certified technicians that inspect each machine before it is
shipped. This ensures that you get a trouble free machine from the get go. When
you need technical help or parts, our courteous staff can help you get what you
need from our fully stocked warehouse.
California Residents See Prop 65 WARNINGS
|