WoodMaxx MX-series wood chipper knives can be changed easily by one person in as little as 10 minutes. The entire top of the blower housing opens like a clam shell, allowing for easy access to the flywheel and knives.

WoodMaxx MX-series wood chippers are equipped with five extreme duty 5/8" wide EDPM rubber cogged drive V-Belts that are made specifically for WoodMaxx. Cogged V-belts run cooler, and transfer more torque than plain smooth V-belts. Although the OEM belts are very high quality, if the need arises, the standard size BX belts allows you to purchase replacement v-belts at any auto parts store.

SAFETY AUTO FEED STOP BAR & IN-FEED ROLLER SPEED ADJUSTMENT

HINGED IN-FEED HOPPER

All wood chippers will require some routine maintenance like adjusting the gap between the bed knife and the flywheel knives as they wear. This gap is essential to proper operation of the wood chipper. The in-feed hopper on the WoodMaxx MX-9900 swings open to expose the bed knife, allowing the user to access the knife to make adjustments. Simply remove 2 bolts and the hopper will swing open like a door. This feature is exclusive to WoodMaxx. Other chippers require the user to crawl into the infeed hopper to change the bed knife or adjust the gap between the bed knife and the flywheel knives.

8.25" DIAMETER OCTAGONAL SHAPED COMMERCIAL STYLE INFEED ROLLER -

A WoodMaxx exclusive and patented design. Everyone knows what happens to the branches when they reach the flywheel knives of the wood chipper, but getting the material to pull into the wood chippers effectively and quickly is the trick. Many factors must be considered when designing an effective In-feed Roller System: the overall diameter, knife spacing, tooth angle, type of steel, hardness, down pressure and In-feed speed. After countless hours of research and development on the In-feed system, we have developed a large diameter (8") octagonal shaped In-feed roller. This exclusive design allows the chisel shaped teeth of the roller to grab and climb up and over the branches to easily bite in and effectively pull the material into the wood chipper flywheel at speeds up to 75 ft. /min. In short, the larger the roller, the easier it rolls over the material. The smaller the roller, the more likely it is to slip and spin on the branches. Similar to how the small wheels of a shopping cart stop when contacting a small stone in a parking lot.

To prevent material like tree bark and leaves from impacting between the teeth of the In-feed roller, we spaced the chisel teeth out. This spacing allows the complete down pressure of the high-tension gas springs to be focused on one chisel tooth at a time increasing total down pressure. Additionally, this spacing allows the roller to self-clean. These rollers, along with the high-tension gas springs aggressively bite into any type of material. The advantage of his type of roller is that it aggressively grabs any size limb with or without leaves up to 8". Long or short needle pine, as well as small, vine type material is no problem for the WoodMaxx MX-9900 wood chipper. Small branches, leaves, or vines won't wrap around the Infeed roller as they would on other wood chippers.

EASY SWIVEL DISCHARGE CHUTE -

AUTOMATIC BELT TENSIONER -

The hydrostatic pump belt tensioner is automatic on the MX-9900 wood chipper. This feature keeps consistent and correct pressure on the drive belt. If the drive belt is too tight, then excessive bearing and/or pump failure is likely. If it's too loose, it will slip, resulting in loss of performance. This feature eliminates the need to adjust the belt, ensures that proper tension is achieved, and increases the longevity of the pump and bearings. It also saves you the hassle of constant adjustment.

WIDE FOOTPRINT SUPPORT BASE

Due to the robust weight of the MX-9900 PTO wood chipper, we have developed a strong support base. To prevent the machine from sinking into the soft ground during operation, the new MX-9900 offers a wide footprint skid type support base. This skid shoe type base is angled upward on the end like a ski to prevent it from digging into the soft ground during operation.

HIGH FLOW FLYWHEEL CHAMBER VENTILATION -

WoodMaxx MX-series wood chippers incorporate a series of precisely located ventilation holes in the flywheel chamber.
This feature creates a strong vacuum that draws air into the flywheel chamber and in combination with the fan blades on the back of the flywheel forcefully ejects the wood chip s out of the chamber. This keeps the discharge chute clear, and reduces the chances of a jam. The WoodMaxx patent pending hole pattern is specifically designed to bring the air into the chamber at the optimal volume and location.

JIC STANDARD HOSE FITTINGS

The WoodMaxx MX-9900 wood chipper utilizes JIC (joint industrial council) hose fittings that are rated for 5000 psi. For you this means that if you ever need to replace a hydraulic hose, that your local tractor supply or auto parts store can make hoses while you wait. JIC fittings are widely used in hydraulic fluid transfer, the military, and are typically very easy to come by. No trying to chase down an adapter because of mismatched threads.

MAIN SHAFT SUPPORTED BY TWO INDUSTRIAL FLANGE BEARINGS

The 2" main shaft on the MX-9900 PTO wood chipper passes through the flywheel housing and is supported by two industrial flange bearings. This feature, combined with the 2" shaft, allows the flywheel to run extremely true, while adding a great deal of strength. Competing machines use a 1-3/4" shaft in conjunction with two pillow block bearings, and the flywheel is cantilevered beyond these bearings. With this setup, there is a possibility of breaking a bearing housing if the machine jams.

IN-FEED ROLLER TENSION GAS SPRINGS

The WoodMaxx MX-series wood chipper utilizes USA made high tension gas springs. These gas springs maintain the same tension throughout the entire range of motion. This feature also slows and dampens the downward motion of the In-feed roller to prevent the infee roller from slamming downward, ultimately increasing the longevity of the components. These high-tension gas springs achieve 185 lbs. of downward force that allows the teeth of the In-feed roller to dig into the branches and ensure a smooth entry into the chipper head.

WEIGHT

MX-9900... 1000lbs of American made steel!

RUST RESISTANT POWDER COAT FINISH

The WoodMaxx MX-9900 is finished with UV stable fade-resistant polyester powder coating that is baked on at 450 degrees. Powder coating finish is thicker and more durable than ordinary paint.

CLEAR VINYL CHIP BAFFLE

Safety is paramount, therefore all WoodMaxx chippers are equipped with a clear vinyl baffle feature that protects the user from chip blow-back, while allowing the user to see what is going on in the hopper.

SLEEK HYDRAULIC HOSE CONFIGURATION

The hydraulic hose configuration for the WoodMaxx MX-9900 requires only two streamlined hydraulic hoses. This is possible because of the patent pending upgraded hydrostatic drive system that eliminates many of the components and hoses of traditional open hydraulic systems. This feature makes future maintenance a breeze.

NYLON PROTECTIVE HYDRAULIC HOSE WRAP

Along with the simple two hose configuration, the MX-9900 includes the additional protection of nylon hydraulic hose wrap for long life. This hose wrap reduces chaffing and protects the hoses from abrasion and environmental damages.

PTO SHAFT

The WoodMaxx MX-9900 wood chipper includes our Premium PTO shaft that retails for $250 if purchased separately.

3 YEAR WARRANTY

The WoodMaxx MX-9900 wood chipper comes with a 3 year warranty. Our service department also stocks a full line of replacement parts if the need arises.

IS THE ORIGINAL

WoodMaxx is the original chipper of this design. After hundreds of hours spent designing, testing, and research and development to create this wood chipper, WoodMaxx offers the highest level of quality and innovation with many exclusive features not found anywhere else. With the highest quality of workmanship and history of satisfied customers that WoodMaxx has, we are confident that you will be completely satisfied with this machine.

EXPERIENCE

WoodMaxx MX-series wood chippers are extremely robust, and can handle very heavy use. Designed and manufactured in upstate New York, each machine we offer is thoroughly tested on our 18 acre proving grounds before being offered to the public. With years of experience and thousands of machines in service today, we are confident that this machine can handle even the toughest projects that you have. Our machines are currently in service in several commercial applications, such as: the Army Corps of Engineers, college campuses, municipalities, The US National parks service, tree farms, golf courses, apartment complexes, and thousands of residences. WoodMaxx chippers are also represented around the globe, with machines as far away as Hawaii, and Alaska, as well as several countries including: Chile, Russia, Panama, Colombia, Poland, United Arab Emirates, Israel, West Africa, Greece, Norway, Iceland, Ecuador, Honduras, Ireland and of course Canada.

SERVICE

At WoodMaxx our service department is staffed with professional certified technicians that inspect each machine before it is shipped. This ensures that you get a trouble-free machine from the get go. When you need technical help or parts, our courteous staff can help you get what you need from our fully stocked warehouse.