FREE
& CANADA!
**We accept US funds only -
Thank you!

Credit Cards

Volusion SSL Seal
facebook

  Home > Mowers.. >

(DEPOSIT) FMX-60Hs PTO Finish Mower with Hydraulic Side Shift



 
Alternative Views:


WoodMaxx ™ FMX-60Hs
PTO Finish Mower w/ hydraulic side shift/ side mowing disk


ONLY $2,149.00

25-50 hp REQUIRED

CALL FOR AVAILABILITY
$100.00


Availability: Back Order
Product Code: FMX-60HS
Qty:

Description
 
WoodMaxx ™ FMX-60Hs PTO Finish Mower
Hydraulic side shift; 25-50 HP required; Requires Rear Tractor Remotes (Not Supplied)
$2,149.00
Features

WoodMaxx ™ FMX-60Hs FINISH MOWER

WoodMaxx FMX- series finish mowers are an innovative twist on an old idea. Instead of a single blade like typical finish mowers, the WoodMaxx FMX- series finish mowers utilizes 3 rotary disks with two attached blades on each that allow the blades to fold back if they contact a solid object. The disks include fan blades to keep the air moving to forcefully eject the grass clippings from below the mowers dual exhaust ports. This is exclusive to WoodMaxx and makes the FMX-series mowers unlike any other. This feature provides for more mass and inertia which ultimately provides for much improved mowing results. Please read below for specifications.

OVERALL WIDTH

65” Mower, Plus 24” Side Mower = 85” Total

CUTTING WIDTH

60” Mower, Plus 22” Side Mower = 82” Total

WEIGHT

687 lbs.

HP REQUIREMENTS

25-50 PTO horse power

CUTTING HEIGHT

1-1/2” – 3.25” Adjustable to meet various height requirements

DECK PLATE MATERIAL THICKNESS

9 gauge .160” Structural Q235 roll formed steel for durability.

BLADE TYPE

Easy to sharpen and replace the heavy duty blades are made from .42" 60si2mn, spring steel, (American standard: A29m) formed, heat treated, and quenched in oil. They weigh 1lb 7 oz.

NUMBER OF BLADES

6 blades on the mower, and 2 blades on the side disk for a total of 8.

PRECISION BLADE OVERLAP

The blades are staggered precisely with no gap in the mowing area. Blade overlap is important to achieve an even cutting result.

NSK BRAND SHAFT BEARINGS NEW FOR AUGUST 2016

NSK is a leading bearing and motion control manufacturing company founded in Tokyo, Japan in 1916. Today NSK has several plants around the world including England, Germany, USA and Switzerland and by far one the best quality bearings available on the market today. Although these bearings are very costly, we feel that in an application with high load and dynamic forces such as a flail mower that such high quality bearings are required. These bearings are noticeably smoother, quieter, and cooler running than any competitor and far superior to any no-name brand. Some inferior bearings contain plastic interior ball cages that are susceptible to breakage from shock loads. Poor material and tolerances generate excessive heat that translates into premature bearing failure and even belt wear as the heat travel to the pulleys and the belts. All bearings are not created equal, and this is a feature that should not be overlooked when shopping for a flail mower. CLICK HERE FOR PICTURE

EASY ACCESS HINGED MAINENANCE PANEL

This allows for easy inspection, cleaning, belt adjustment, and maintenance of your machine.

DUAL DISCHARGE OPENINGS

Two discharge openings allow for quick and easy removal of the debris from the back left and right side of the mower. This feature allows even distribution of grass clipping to avoid clumping.

HEAVY ROTOR DISK

Instead of a single blade like typical lawn mowers, the WoodMaxx FMX series finish mowers utilize 3 disks with two attached blades that allow the blades to fold back if they contact a solid object. This is exclusive to WoodMaxx and makes the FMX series mowers unlike any other. This feature provides for more mass and inertia which ultimately provides for much improved mowing results.

BALANCED CAST IRON PULLEYS

The V-belt pulleys are heavy duty cast iron and balance to eliminate vibration, and run smooth. These pulleys also provide for more spinning mass to increase mowing power.

BLADE SWING DIAMETER-21”

Large swing so that the blades build required inertia.

BLADE SPEED

2160 RPM

BLADE SPEED

128 Ft. /sec – high tip speed = Efficiency to cleanly cut material

SIDE MOWING DISK

24” Side mowing disk is gas spring loaded so that you can easily mow around fence post, trees, and buildings.

HITCH TYPE

Category 1 standard 3 point

OFFSET FROM PTO CENTER

This feature allows for offset from center to the right of the tractor. This feature is helpful for mowing around fences, buildings; walkways exc. From the center of the PTO the mower extends 37.5” to the right and 37.5” to the left.

DRIVE BELTS

3 Total B-series USA gates “truflex” – we use only USA made gates belts on our flail mowers for long life.

DRIVE BELT TENSIONER

Easy to access and adjust through the hatches located on the top of the mower.

PTO SPEED

540 ONLY

GEARBOX RATING

Up to 50 hp. Heavy duty proven oil bath gearbox for long life.

GEARBOX TYPE

Cast iron 540 RPM with internal over-running clutch – when the PTO shaft is disengaged the built in over running clutch allows the PTO shaft to stop turning while the gearbox and rotor shaft slow down gradually. This is an important feature, without it, the gearbox will slam to a halt when the PTO is disengaged, causing stress to the gearbox and your tractor. This feature should not be overlooked when shopping for a mower.

DRIVE-LINE / PTO SHAFT

Made in Italy 1-3/8” 6 spline w/shear bolt protection.

GREASEABLE SHIELDED BEARINGS

Accessible greasable bearings for easy maintenance.

REAR HEIGHT ADJUSTING ROLLER DIAMETER

5.25” With tapered ends – this roller contacts the ground to ensure even cutting height. The ends of this roller are rounded to eliminate gouging when turning corners. A scraper bar ensures that mud and debris buildup is cleaned off as you go. Two caster type wheels at the front of the mower provide leveling to ensure an even groomed appearance.

FINISH-POWDER COAT

The rust resistant baked on powder coat finish is more durable than conventional paint to keep your machine looking good for years.

WARRANTY- 2 YEARS

A robust machine with an equally robust warranty.

SERVICE

At WoodMaxx ™ our service department is staffed with professional certified technicians that inspect each machine before it is shipped. This ensures that you get a trouble free machine from the get go. When you need technical help or parts, our courteous staff can help you get what you need from our fully stocked warehouse. We keep a full line of replacement parts, and guarantee that we can ship any part within 24 hours.

TECHNICAL DRAWINGS

CLICK HERE to see technical drawings of this machine

COLOR

Color swatches are available. Please request if color matching is a concern




Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Mowers..