FREE
& CANADA!
**We accept US funds only -
Thank you!

Credit Cards

Volusion SSL Seal
facebook

  Home > Mowers.. >

FM-88H PTO Flail Mower (88")



 
Alternative Views:


WoodMaxx FM-88H
88" PTO FLAIL MOWER

NOW ONLY $2999.00

ORANGE OR YELLOW IN STOCK
GREEN AVAILABLE MID MAY

$2,999.00


Availability: Usually ships in 7-10 business days
Product Code: FM-88H


Blades:
  
Color

  

Qty:
Description
 
WoodMaxx FM-88H PTO Flail Mower (88")
50-90 HP R
equired; Category 2 Only; Requires Rear Hydraulic Remotes
$2999.00
Features

NSK BRAND SHAFT BEARINGS – NEW FOR AUGUST 2016

NSK is a leading bearing and motion control manufacturing company founded in Tokyo, Japan in 1916. Today NSK has several plants around the world including England, Germany, USA and Switzerland and by far one the best quality bearings available on the market today. Although these bearings are very costly, we feel that in an application with high load and dynamic forces such as a flail mower that such high quality bearings are required. These bearings are noticeably smoother, quieter, and cooler running than any competitor and far superior to any no-name brand. Some inferior bearings contain plastic interior ball cages that are susceptible to breakage from shock loads. Poor material and tolerances generate excessive heat that translates into premature bearing failure and even belt wear as the heat travel to the pulleys and the belts. All bearings are not created equal, and this is a feature that should not be overlooked when shopping for a flail mower.

OVERALL WIDTH

88.5"

CUTTING WIDTH

79"

WEIGHT

1309lbs.

HP REQUIREMENTS

50-90 HP

CUTTING HEIGHT

¾”-4” Adjustable to meet various height requirements

DECK PLATE MATERIAL THICKNESS

1/4” structural Q235 roll formed steel for durability.

SIDE PLATE THICKNESS

3/8” Structural Q235 roll formed steel for durability.

BLADE TYPE

Duck-foot or reversible Y- blades. Our duck foot blades are 40cr, alloy structural steel. (American standard, AISI/SAE/ASTM steel no: 5140) and forged to a tapered wedge shape to avoid material buildup on the blades. CLICK HERE FOR PICTURE. Each blade weighs 1 lb. 15 oz. (cast steel is much more durable than cast iron) competitors use flat face blades. CLICK HERE FOR PICTURE. Side by side comparison of WoodMaxx exclusive duck-foot design: PICTURE 1 : PICTURE 2 : PICTURE 3 . The reversible Y-blades are made from .42" 60si2mn, spring steel, (American standard: A29m) formed, heat treated, and quenched in oil. They weigh 1lb 7 oz for the set. Use the duck-foot blades for clearing saplings, and the Y blades for grasses. CLICK HERE FOR PICTURE

NUMBER OF BLADES

16 Duck foot blades or 32 Y-blades

PRECISION BLADE OVERLAP

The blades are staggered precisely with no gap in the mowing area. Blade overlap is important to achieve an even cutting result. CLICK HERE FOR PICTURE

ROTOR ROTATION- REVERSE

The rotor spins in the opposite direction as the wheels of the tractor when traveling forward. This allows the blades to shear the material as it is folded forward by the mowers. The material is then thrown up and over the rotor.

ROTOR TUBE DIAMETER- 5”

5”- Heavy duty 3/8” wall tubing for long life.

BALANCED ROTOR TUBE

The rotor tube is balance to reduce vibration and ensures that the mower runs smooth, and reduces wear on the bearings.

BALANCED CAST IRON PULLEYS

The v-belt pulleys are heavy duty cast iron and balance to eliminate vibration, and run smooth.

ROTOR SWING DIAMETER-15”

Large swing so that the blades build required inertia.

ROTOR SHAFT SPEED

2125 RPM

BLADE SPEED- 138 FT. /SEC.

High speed = efficiency to cleanly cut material

HITCH TYPE

Category 2 only.

OFFSET FROM PTO CENTER

Shifted left (39.5”L/49"R), shifted right (26"L/63"R) – This feature allows for variable offset from center to the right of the tractor. This feature is helpful for mowing around fences, buildings, walkways, etc. NOTE: Requires rear hydraulic remotes on tractor. We cannot supply these if your tractor does not already have them, they must be dealer or factory installed. CLICK HERE FOR PICTURE

DRIVE BELTS

3 Total B-series USA gates “truflex” – we use only USA made gates belts on our flail mowers for long life. CLICK HERE FOR PICTURE

DRIVE BELT TENSIONER

Solid state automatic – this feature automatically adjust the belt tension so you don’t have to worry about slippage or overworking the belts. This feature greatly increases the belt life. CLICK FOR PICTURE

PTO SPEED

540 ONLY

GEARBOX RATING

Up to 90 hp. Heavy duty proven gearbox for long life. CLICK HERE FOR PICTURE

GEARBOX TYPE

Cast iron 540 RPM with internal over-running clutch – when the PTO shaft is disengaged the built in over running clutch allows the PTO shaft to stop turning while the gearbox and rotor shaft slow down gradually. This is an important feature, without it, the gearbox will slam to a halt when the PTO is disengaged, causing stress to the gearbox and your tractor. This feature should not be overlooked when shopping for a mower. CLICK HERE FOR PICTURE

REPLACEABLE SKID SHOES

The skid shoes reduce gouging are bolt on so you can adjust or replace them easily when the time comes. CLICK FOR PICTURE

DRIVE-LINE / PTO SHAFT

1-3/8” 6 spline w/slip clutch. CLICK HERE FOR PICTURE

GREASEABLE SHIELDED BEARINGS

Accessible greasable bearings for easy maintenance.

REAR HEIGHT ADJUSTING ROLLER DIAMETER

5.25” With tapered ends – this roller contacts the ground to ensure even cutting height. The ends of this roller are rounded to eliminate gouging when turning corners. A scraper bar ensures that mud and debris buildup is cleaned off as you go. CLICK HERE FOR PICTURE

FINISH-POWDER COAT

The rust resistant baked on powder coat finish is more durable than conventional paint to keep your machine looking good for years.

WARRANTY- 2 YEARS

A robust machine with an equally robust warranty.

SERVICE

At WoodMaxx our service department is staffed with professional certified technicians that inspect each machine before it is shipped. This ensures that you get a trouble free machine from the get go. When you need technical help or parts, our courteous staff can help you get what you need from our fully stocked warehouse. We keep a full line of replacement parts, and guarantee that we can ship any part within 24 hours.

TECHNICAL DRAWINGS

CLICK HERE to see technical drawings of this machine

COLOR

Color swatches are available. Please request if color matching is a concern.

Call WoodMaxx ™ 855-966-3629

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Mowers..
FM-88H Flail Mower
Mowers.. > FM-88H Flail Mower