WoodMaxx SB-series snow blowers are equipped with a serrated auger. This feature allows the blower to quickly chop and pull frozen snow into the blower fan. Additionally, we have equipped the auger with a quick change shear bolt to protect the drive train if the auger was to experience a jam.
STRENGTH IN DESIGN
Designed in Buffalo New York (we know snow) the WoodMaxx SB and SS series snow blowers are the perfect combination of size, weight, and power. Offering features found nowhere else; these machines are built like a tank and made to last a lifetime. WoodMaxx SB-series snow blowers are manufactured using heavy formed Q-235 (American standard ASTM A-36) structural steel plate, the strongest hot rolled plate steel available. Forming allows for additional strength and rigidity. The pieces are CNC laser cut so that they fit together perfectly, and are then precisely welded. This fact combined with the structural design allows for one rugged snow removal machine.
HIGH INTENSITY LED FLOOD LIGHT OPTION
New for 2015, we have available an optional high intensity (1140 lumen) LED work light to illuminate the work area. Exterior grade Die-Cast Aluminum Housing (Black), whose back also functions as a built-in "heat sink" with 6 LED bulbs 18 total Watts (6 x 3W Diodes), polycarbonate lens, and stainless steel hardware. Designed to throw light in a 90 degree flood pattern, and positioned on the snow blower in just the right spot allows for a wide illumination angle. Only 125.00 when purchased with a SB series snow blower, simply locate the light kit in the parts section and add to your shopping cart before checkout. 10-30VDC (1.40A @ 12V, 0.73A @ 24V)
WoodMaxx SB series tractor PTO snow blower comes in various widths to suite your tractor. Choose from the SB-48 (48") SB-60 (59") SB-72 (72") and the SB-84 (84") widths. When choosing a snow blower for your tractor it is a
general practice to choose one that has a cutting width that is at least as
wide as the distance from outside to outside of the rear tires of your tractor.
The cutting height of the SB series snow blowers
range from SB-48 (25") SB-60(26") SB-72 (27") and the SB-84 (27") high cutting capacity to
match the width, auger and fan dimensions for the machine.
BOLT-ON HARDENED STEEL CUTTING EDGE
Offering a bolt-on replaceable cutting edge as standard equipment allows for the use of hardened steel and easy replacement
when the time comes. Simply unbolt the worn cutting edge and replace it easily. Some competing blowers use soft common steel cutting edges that are welded in place. Also the design of the cutting edge is such that the blade rides flat on the ground so that it acts as a skid shoe. This design prolongs the life of the cutting edge and the skid shoes. Additionally the cutting edge is capable of scraping snow clean down to the pavement, but is also more forgiving on stone driveways than angled cutting edge designs.
BOLT-ON REPLACEABLE SKID SHOES
Standard equipment includes bolt-on and replaceable
skid shoes. Because of the design of the cutting edge, these skid shoes take
little wear, but are easily replaced when the time comes.
WoodMaxx SB series snow blowers offer various
auger diameters to match the various size models. The SB-48 and SB-60 utilize a
15-1/2" auger to feed snow into the fan, while the SB-72 and SB-84 use a larger 17-1/2"
The thickness of the auger blades is something
to consider when choosing a snow blower. That is why we use heavy gauge 5/16" (8mm)
steel to prevent damage to the auger blades when backing into those frozen snow
AUGER TUBE DIAMETER
The main auger is built around and supported by
a tube; that is why we use heavy wall 2-7/8" (70mm) tube as the base of our auger
design. This large diameter ensures that the auger continues to run true
4-BLADE OPEN CENTER FAN
SB-series snow blowers utilize a 4-blade open
center cupped fan design. After countless hours of research and development in
upstate NY the fan design of the WoodMaxx SB and SS snow blowers are extremely
productive at scooping and discharging snow. The open center fan design allows
snow to be easily pushed into the fan by the auger where it is then thrown to
the outside of the housing by the 4 evenly spaced fan blades. These cup shaped
blades efficiently force the snow outward to evacuate the housing.
LARGE FAN DIAMETER
The diameter of the fan is directly related to
the fan blade tip speed and the distance at which the fan can throw snow. The
fan diameter of the WoodMaxx SB-series snow blowers is sized according to the
width and capability of the snow blower along with the compatible tractors.
Larger HP tractors can handle larger fans. Accordingly the fans offered are
SB-48 (20" fan with 2,827 ft./min blade tip speed) SB-60 (22" fan with 3,110
ft./min. blade tip speed) SB-72 (24" fan with 3,393 ft./min) and the SB-84 (24" fan with
3,393 ft./min) blade tip
6.75" FAN DEPTH
Fan depth on all three size SB snow blowers is
6.75" deep to allow for heavy snow removal without plugging.
5/16" (8MM) FAN STEEL THICKNESS
Because inevitably chunks of ice may pass
through the fan, it is important to use heavy steel in the construction to
prevent damage. Therefore the steel used for the production of the fan is 5/16"(8mm)
These fans are heavy duty and act as a flywheel to keep going through heavy
snow. The weight of the fan alone is SB-48 (55lbs.) SB-60 (63 lbs.) SB-72 (74
lbs.) and SB-84 (74 lbs). All WoodMaxx SB-series fan are dynamically balanced to ensure smooth
running without vibration while prolonging bearing life.
CAST IRON GEAR BOX
The heart of the WoodMaxx SB-series snow
blowers is the oil bath gear box. Built for heavy use, the sealed cast iron
gear box houses precisely machined gears that are bathed in oil during use for
#60 ROLLER CHAIN TRANSMISSION
Power is transmitted from the gear box to the
auger through a shaft and heavy #60 chain and sprocket design, which
incorporates an easy to adjust chain tensioning mechanism. This solid state
design ensures proper auger to fan speed ratio, increases torque and is easy to
SB-series snow blowers will mount to any
Category 1 or 2 three point hitch attachment, and is category 1 quick hitch
HIGH DENSITY POLYETHYLENE DISCHARGE
WoodMaxx SB-series snow blowers utilize a
high-density polyethylene chute liner to keep the snow moving and prevent snow
from freezing on and plugging the discharge chute. This liner also provides a
very slick surface for the snow to deflect off of, ultimately increasing the
speed and distance at which snow is thrown out of the chute.
9" CHUTE OUTLET DIAMETER
9" of clear opening allows the snow to clearly
and freely exit the fan housing. This keeps the snow moving to prevent freeze
up and plugging.
1/8" (3MM) DISCHARGE CHUTE THICKNESS
Like every aspect of the WoodMaxx SB-series the
discharge chute is no exception. The steel is heavy gauge 1/8" (3mm) thick
steel and formed to an arch that was specifically designed to throw snow as far
CHUTE ROTATION OPTIONS -
(MECHANICAL, 12 VOLT ELECTRIC, OR HYDRAULIC)
The WoodMaxx SB-series tractor snow blower comes standard with a unique mechanical crank positive gear and pinion crank design. Unlike worm gear designs common on competing machines that slip and require many, many cranks of the handle to rotate 180 degrees, the WoodMaxx design requires only 3 cranks of the handle to rotate the chute 180 degrees. Supported by 4 roller bearings, the chute rotates easily without slipping. The crank also mounts to the ROPS of your tractor to reduce the backward reach required to access the crank. As an upgrade we also offer a 12 volt electric
chute rotation/ deflection option that comes complete with wiring harness and
controls. Or if your tractor is equipped with hydraulic
remotes, we offer a hydraulic chute rotation/ deflector option as well.
Either the electric or hydraulic options can be purchased and added
on at a later date. (Please note that when you purchase either the electric or
hydraulic chute rotation/ deflection options, then the mechanical crank system will
not be included with your order) This part can be ordered separately for an
PTO SHAFT INCLUDED
A shear bolt torque limited PTO shaft is
included with the purchase of any WoodMaxx SB-series snow blower. Shear bolts
are replaceable with a 5/16" x 2" grade 2 bolt that is easily accessible at any
hardware store. For an $150 up charge, we offer the option of a premium quality USA made PTO shaft. If purchased at a later date, this same shaft is $250.
Several colors are available, please request a color sample if shade matching is a concern.
Call at 855-966-3629