**We accept US funds only -
Thank you!

Credit Cards

Volusion SSL Seal

  Home > Log Splitters >

LS-34T Kinetic Log Splitter
Kinetic log splitter, log splitter, wood splitter, kinetic wood splitter, hydraulic log splitter ,hydraulic wood splitter, WoodMaxx, Kinetic log splitter, log splitter, log splitter reviews, best log splitter, hydraulic log splitter, LS-34T, LS-28T
WoodMaxx LS-34T 34 Ton Kinetic Log Splitter

Alternative Views:


Product Code: LS-34T


Briggs & Stratton Engine
Honda Engine [Add $200.00]

Description Warranty Information


WoodMaxx LS-34T


The WoodMaxx LS-34T is a powerful kinetic splitter that can split wood up to ten times faster than any conventional hydraulic splitter. The LS-34T log splitter is equipped with a professional grade Briggs & Stratton XR950 gasoline engine that boasts 6.5 HP and 9.50 ft./lbs. of torque. Alternatively, you can choose the optional highly fuel efficient Honda GX200 engine that provides 5.5 HP and 9.1 ft./lbs. of torque for only $200.00 more. Dual 75 pound flywheels spinning at 450 RPM create enough inertia to generate 34 tons of force splitting logs 24" long and up to 28" wide in under 3 seconds! This is equivalent to swinging a 150 lb splitting maul!!!!! Don't need this much power? Take a look at the WoodMaxx LS-28T (28-ton splitter). Auto ram retraction leaves your hands free to re-load quickly. Easy to maintain and hassle free. No hydraulic pumps, valves, hoses, or oil to worry about ...ever. Although the splitter weighs 507 pounds it can be easily moved around the work site with the attached tow hitch.

Check out these features:

- Standard Briggs & Stratton 208cc OHV XR950 Professional series engine, 6.5 hp. / 9.50 ft./lbs. of torque (engine meets U.S. EPA and California EXH/EVP SORE regulations) 2-yr consumer engine warranty , 1-yr commercial

- Optional ($200.00 upgrade) Honda 196cc OHV GX200, 5.5 HP / 9.1 ft./lbs. of torque (engine meets U.S. EPA and California EXH/EVP SORE regulations) 3-yr engine warranty
- Oil Guard System, automatically stop the engine if the oil level is too low.

- 28" Log Diameter Capacity

- 24" Log Length Capacity

- 8" Wedge Height

- Dual 75 lb. Flywheels (Dynamically balanced)

- Flywheel Max RPM 450

- Heavy Duty Steel Work Table

- Two Hands Control for safety

- Automatic Ram Retraction

- 3-Second Cycle Time

- Towable up to 20MPH

- Baked on powder coat finish

- 19# 7.0-8 Tires

- Weight - 507 lbs.
- Wheel base is 31" wide for easy travel through trails, fence gates, etc. If a wider wheel base is needed we offer a 12" base extension kit $50.00 (for a total 43.5")

- 2 yr. parts warranty residential; 1 yr. commercial

- 90% assembled upon delivery

- Crate dimensions L-69" x W-20" x H-35" crated weight is 600 lbs.
- FREE shipping to USA & Canada (lower 48 only, AK and HI extra)

Average Customer Review: 5 of 5 Total Reviews: 22 Write a review.

  1 of 1 people found the following review helpful:
WOW! November 30, 2018
Reviewer: Bruce from Troy, NC United States  
Ordered my splitter with the Honda engine and I just can't believe how much wood I can split! I had a large pile and in a few minuets it will split as fast as you can load it.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
I feel like the new king in town with my new toy July 30, 2018
Reviewer: Eric from Cantley, QC Canada  
I've been using my new LS-34T splitter intensively during the last two weeks and I'm very impressed!! This splitter is built very strong. I've ordered my splitter with the Honda engine and I just can't believe how much wood I can split with a full tank. I'm now saving time and money...

Was this review helpful to you?

  2 of 2 people found the following review helpful:
LS 34 T Kinetic splitter June 6, 2018
Reviewer: Randy Gingerich from St. Agatha, ON Canada  
I am very happy with the performance and speed of this unit.
It does exactly what Woodmaxx claims it does, truly a 2 second cycle time with seldom a second hit required, even on knotty logs.
I did find a few loose fasteners upon it's arrival, however this is a very minor issue when compared to the time saved to split the same amount of firewood,
I have recommended this splitter to my friends.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
THIS THING IS A BEAST!!! June 6, 2018
Reviewer: Ernest Sumner from Helena, MT United States  
After endless searching and comparing, I decided to pull the trigger and order this splitter.  Communication with the company was awesome, and before I knew it, it was here.  It was like Christmas morning when I was 5!  The crate showed up in great condition.  This thing is heavy!  Make sure you have help.  Assembly was a breeze, taking around an hour.  The color instruction book was awesome, but hardly needed. I have been splitting fir rounds that are 24-36 diameter and full of knots.  It was all I could do to lift these onto the table (wet/green). The splitter did not flinch.  In 3 hours of use, I got it to stop once on a huge knot.  Just a reset on the handle, and hit it again, went right through.  Showed a friend of the family this amazing machine, and now he has one on order. I cannot say enough good things about this splitter.  If you are on the fence about the purchase of this machine, do not be!  You will not regret it!

Was this review helpful to you?

  1 of 1 people found the following review helpful:
WoodMaxx Log Splitter March 5, 2018
Reviewer: Steve Burns from Nordland, WA United States  
The assembly took place easily without following the well-illustrated manual.  EXCEPT, during my final stage of assembly, I dropped a 5mm nut which secures the split handle. .....  But to my surprise extra hardware was provided.  What a relief and a smile came upon my being.  
I did follow the instruction for starting the engine and lubricating the rail.   Started the engine and split several logs.  All of this was done by myself.  If I would have reviewed the instructions, I would have placed the hydraulic jack into position and removed the container bottom more efficiently.  But, using the sides of the container provided a nice platform for sitting while assembling.  
I suggested another feature.  This would be to have an assembly whereby one could leverage the log from the ground up to the work table.  i.e. place the log into a cradle and then with a long handle titer totter the log up into position.   (work like the Egyptians)

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

Log Splitters
LS-34T Kinetic Log Splitter